Americas
North America
South America
Canada
Australia
Details
Pyrex-Nitride Probe – TRiangular Single Cantilever
NanoWorld Pyrex-Nitride PNP-TRS probes are designed for various imaging applications in contact or dynamic mode and can also be used for ScanAsyst®** mode in air.
The Pyrex-Nitride TRS probes have a single silicon nitride cantilever with a very low force constant and an integrated oxide sharpened, pyramidal tip with a height of 3.5 µm. The tip is located 4 µm behind the free end of the cantilever. The probe series features a support chip that is made of Pyrex.
The typical tip radius of curvature is below 10 nm.
All chips are pre-separated prior to shipment and come in Gel-Pak containers.
NanoWorld Pyrex-Nitride PNP-TRS probes are designed for various imaging applications in contact or dynamic mode and can also be used for ScanAsyst®** mode in air.
The Pyrex-Nitride TRS probes have a single silicon nitride cantilever with a very low force constant and an integrated oxide sharpened, pyramidal tip with a height of 3.5 µm. The tip is located 4 µm behind the free end of the cantilever. The probe series features a support chip that is made of Pyrex.
The typical tip radius of curvature is below 10 nm.
All chips are pre-separated prior to shipment and come in Gel-Pak containers.
| Cantilever Specifications | |
|---|---|
| Spring k (N/m | 0.32 |
| Freq (kHz) | 67 |
| Length (µm) | 100 (90 -110) |
| Width (µm) | 13.5 |
| Thickness (µm) | 0.6 (0.5 - 0.7) |
| Shape | triangular |
| Material | Silicon nitride |
| Reflex Coating (nm) | Cr/Au (5/65) |
| Tip Specifications | |
|---|---|
| Tip radius (nm) | 10 |
| Tip height (µm) | 3.5 +/- 0.5 |
| Front angle (°) | 35 +/- 1 |
| Back angle (°) | 35 +/- 1 |
| Side angle (°) | 35 +/- 1 |
| Tip shape | 4-sided |
| Tip material | Silicon nitride |
| Tip coating (nm) | none |
Additional Information
| Tip Radius | 10 |
|---|---|
| Tip Radius | 5-10 nm |
| Spring Constant | 0.32 |
| Frequency | 67 |
| Compatibility | blueDrive |
| Manufacturer | Nanoworld |
